In case you are reading this troubleshooting guide, then it is obvious that you are facing the Synology NAS web address not working issue. Did you come across this issue after trying to find Synology on network? Well, worry not. We are here at your service. You can easily get rid of the issue in debate only if you read the troubleshooting tips mentioned in this article with open eyes. In other words, be careful while reading.
Why is Synology NAS Address Not Working? What to Do?
Reason: Incorrect Web Address
The first reason why you are experiencing the Synology NAS web address not working issue is because the address used by you is incorrect. Perhaps, it has typing errors.
Solution: To start fixing the Synology NAS web address not working issue, you should enter the correct web address. Make sure that there is no space for typing errors. Along with this, you should not use the search bar. It will display results, sure, but definitely not the ones that you want. So, keep yourself protected from them.
Reason: No Internet Connection
Check whether your client device has internet access or not. No? And there, you have found the second reason why the Synology NAS web address not working issue is troubling you.
Solution: To make another attempt to the resolve the Synology NAS web address not working issue, you should connect one end of the Ethernet cable to the laptop and another to the WiFi device in your house, whether it is router or modem. Once done, do one thing, i.e. find Synology and see if the issue in discussion has left you for good.
Reason: Cache-Filled Web Browser
Still experiencing the same issue? Well then, check whether the internet browser in use is even cleaned or not? In other words, see whether it is filled with cache or cookies.
Solution: Cache-filled web browsers can be cleaned within minutes. You can do so by making your way to the settings menu. For your information, only web browser gets cleaned in the same way. Each one of them has a different way. Taking this into account, you should clean the browser without wasting any more time.
Reason: Restart the Client Devices
This reason is unknown but the existence of technical glitches can also force one to face issues like the Synology NAS web address not working issue.
Solution: To get rid of them with ease, one needs to restart or reboot the client device. This means that whether you are using a computer or laptop, you need to give a fresh start. To restart the device, one needs to press the Windows key. Click the power button. Select the Reboot button and given the device enough time to get booted up.
Did Nothing Help You?
In case nothing so far help you to troubleshoot the Synology NAS web address not working issue, then it means that the reason behind it is something else which we are not able to figure out. In this case, you should try the ultimate hack, i.e. to reset the networking device. Now the point of concern is how to reset Synology NAS?
Well it is not hard. You just need to go through the steps which are given in the product manual of your Synology NAS. Starting from the reset process to enabling different features, you will find everything that you want to gain knowledge regarding there.
Verdict
Though troubleshooting the Synology NAS web address not working issue is not difficult, still many users get stuck when it comes to doing so. Given you have been standing in the queue for long; we are anticipating that we were able to help you to come out of it.
If we were, then dropping a few words of appreciation will do you good. You need to do so for your fellow readers. The same effort can be made if you look and utilize the section given at the bottom of this article, in case it has one. Do you need us to be more specific? Well, you ought to use the comment section to share what you have to say.